rev. 1.0 june 2018 www.aosmd.com page 1 of 7 AOZ8650BDT-03 single channel bidirectional tvs diode general description the AOZ8650BDT-03 is a single channel transient voltage suppressor designed to protect high speed data lines and voltage sensitive electronics from high transient conditions and esd. this device incorporates one bidirectional tvs diode in an ultra-small 0201 footprint package. it may be used to meet the esd immunity requirements of iec 61000-4-2, level 4 (15 kv air, 8 kv contact discharge). the AOZ8650BDT-03 comes in an rohs compliant package and is rated over a -40c to +125c ambient temperature range. the ultra-small 0.6 mm x 0.3 mm 0201 footprint package makes the AOZ8650BDT-03 ideal for applications where pcb space is a premium. the small size and high esd protection makes it ideal for protecting voltage sensitive electronics from high transient conditions and esd. features ? esd protection for high-speed data lines: C iec 61000-4-2, esd immunity: - air discharge: 30 kv; - contact discharge: 30 kv; C iec 61000-4-5 (lightning) 10 a (8/20 ? s) C human body mode: 8 kv ? bidirectional tvs ? low capacitance: 0.75 pf ? low clamping voltage ? low operating voltage: 3.3 v applications ? mobile phones ? notebook computers ? portable devices typical application pin configuration 1 2 0.6mm 0.3mm signal line downloaded from: http:///
AOZ8650BDT-03 rev. 1.0 june 2018 www.aosmd.com page 2 of 7 ordering information aos green products use reduced levels of halogens, and are also rohs compliant. please visit www.aosmd.com/media/aosgreenpolicy.pdf for additional information. absolute maximum ratings exceeding the absolute maximum ratings may damage the device. notes: 1. iec 61000-4-2 discharge with c discharge = 150 pf, r discharge = 330 ? . 2. human body discharge per mil-std-883, method 3015 c discharge = 100 pf, r discharge = 1.5 k ? . maximum operating conditions the device is not guaranteed to operate beyond the maximum operating conditions. part number ambient temperature range package environmental AOZ8650BDT-03 -40c to +125c dfn 0.6 x 0.3 a_2l green product parameter rating any pin to pin 3.3 v peak pulse current (i pp ), t p = 8/20 s 10 a peak pulse power (p pp ), t p = 8/20 s 80 w storage temperature (t s ) -65c to +150c esd rating per iec61000-4-2, contact (1) 30 kv esd rating per iec61000-4-2, air (1) 30 kv esd rating per human body mode (2) 8 kv parameter rating junction temperature (t j ) -40c to +125c downloaded from: http:///
AOZ8650BDT-03 rev. 1.0 june 2018 www.aosmd.com page 3 of 7 electrical characteristicst a = 25c unless otherwise specified. notes: 3. these specifications are guarant eed by design and characterization. 4. measurements performed using a 1 00ns transmission line pulse (tlp) system. symbol parameter conditions min. typ. max. units v rwm reverse working voltage 3.3 v v br reverse breakdown voltage i t = 10 a 6 10 12 v i r reverse leakage current max. v rmw 15 0n a v cl clamping voltage (3)(4) (100ns transmission line pulse) i tlp = 1 a 2.5 3 v i tlp = 16 a 6 7.5 clamping voltage (3) (iec61000-4-5, 8/20 s) i pp = 1 a 2.5 3 i pp = 10 a 6.5 8 r dny dynamic resistance (3)(4) i tlp = 1 a to 16 a 0.25 ? c j junction capacitance v i/o = 0 v, f = 1 mhz 0.75 0.95 pf i hold v hold v br v rwm i tlp1 i tlp2 v tlp1 v tlp2 i r i t bidirectional tvs i hold v hold v br v rwm i tlp1 i tlp2 v tlp1 v tlp2 i r i t 1 2 1 2 tlp tlp tlp tlp dny i i v v r ? ? ? downloaded from: http:///
AOZ8650BDT-03 rev. 1.0 june 2018 www.aosmd.com page 4 of 7 typical performance characteristics tlp voltage (v) tlp current (a) 3228 24 20 16 12 84 0 0 12 positive tlp curve (t p = 100ns, t r = 0.2ns) 10 2 4 6 8 tlp voltage (v) tlp current (a) 0 -4-8 -12 -16 -20 -24 -28 -32 -12 -8 0 -6 negative tlp curve (t p = 100ns, t r = 0.2ns) -4 -2 -10 input voltage (v) capacitance (pf) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 2 3 typical variations of cj vs. input voltage 1 4 peak pulse current, i pp (a) clamping voltage (v) 87 6 5 4 3 2 1 0 08 12 iec61000-4-5 surge 8/20 s 4 26 10 downloaded from: http:///
AOZ8650BDT-03 rev. 1.0 june 2018 www.aosmd.com page 5 of 7 package dimensions, dfn 0.6x0.3a_2l,ep2 note 1. all dimensions are in mill imeters. 2. dimensions are inclusive of plating.2. package body sizes exclude mold flash and gate burrs. mold flash at the non-lead sides should be less than 6mil each. 3. controlling dimension is millimeter. converted inch dimensions are not necessarily exact. 4. paddle exposed on bottom. recommend land pattern e1 e d3 d2 d1 0.0246 0.0236 0.0226 0.625 0.60 0.575 d 0.0124 0.0118 0.315 0.30 0.285 a 0.0112 max nom min max nom min symbols dimensions in inches dimensions in millimeters 0.275 0.30 0.325 0.0118 0.18 0.15 0.12 0.25 --- 0.38 --- 0.19 0.22 0.25 top view bottom view side view 0.0071 0.0059 0.0047 ---- 0.0102 ---- ---- 0.0150 ---- 0.0098 0.0087 0.0075 0.0128 0.0108 0.20 0.30 downloaded from: http:///
rev. 1.0 june 2018 www.aosmd.com page 6 of 7 AOZ8650BDT-03 tape and reel dimensi ons, dfn 0.6x0.3a_2l_ep2_s downloaded from: http:///
AOZ8650BDT-03 rev. 1.0 june 2018 www.aosmd.com page 7 of 7 part marking d c AOZ8650BDT-03 (dfn 0.6x0.3a) date code product number code as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. legal disclaimer alpha and omega semiconductor makes no representations or warranties with res pect to the accuracy or completeness of the inform ation provided herein and ta kes no liabilities fo r the consequences of use of such information or any product described herein. alpha and omega semiconductor reserves the right to make changes to such information at any time without further notice. this document does not constitute the grant of any intellectual property rights or representation of non-infringement of any third partys intellectual property rights. life support policy alpha and omega semiconductor products are not authorized for use as critical components in life support devices or systems. downloaded from: http:///
|
